NSP Airwing

The NSP Airwing is a very accessible, lightweight wing, making it ideal for wingfoilers, SUPers and surfers wanting to increase their time and skills on the water. The geometry of the NSP Airwing delivers smooth power, stability and flowing handling. It invites you to experience new watersport sensations.
* Pump sold separately

The NSP Airwing features a wider wind range and control

The NSP Airwing is the result of tons of prototypes and hundreds of testing hours. The NSP R&D process refined the outlines, tube geometries and foil profiles to deliver a ride that is smooth and stable. The wing features a stable, low-aspect shape, balanced with moderate dihedral angles. This increases performance and your wind range, plus it helps keep the wingtips clear of the water.

Light but durable

With weight being an essential performance parameter, we aimed for the lowest weight possible, without compromising strength and durability:
3M weight 2.0 Kg
4M weight 2.3 Kg
5M weight 2.7 Kg
6M weight 3.1 Kg

Accessories Included

  • NSP Airwing


  • NSP Airwing


  • NSP Airwing

    Air valve adapter

Buy online

Wing Size Chart

Surface Wing Span Chord Strut Handles Colors
3m² TBATBA4Light Blue or red
4m² 307 cm160 cm5Light Blue or red
5m² 345 cm180 cm5Light Blue or red
6m² TBATBA6Light Blue or red


Airwing Technical Features

Shape details
• A refined shape design for balanced power and efficiency
• Leading-edge profile and dihedral shape deliver efficient twist dynamics
• Oversized and segmented leading-edge for rigidity (10 segments on the 6m² and 5m² & 8 on the 4m² and 3m²)
• Tapered wing tips aid twist, reduce swing weight and windage.
• The strut and leading-edge tips are reinforced with a light and durable PVC wear patches, while the tips on the NSP Airwing are protected by longer wear strips and reinforced TPU wear pads on the corners.

Boston high-volume valve
Nobody likes to spend more time rigging up and down than necessary. A light-weight, high-diameter “Boston” valve allows for efficient deflating and inflating.

Smart one-pump design
A single-point inflation System gets you on and off the water faster and allows you to tune the pressure between the leading edge and strut.

Hardcore Wingtip reinforcements
Especially for rough surfaces, TPU strips reinforce the wingtips, finished off with vulcanized PVC.

2-ply reinforced trailing edge
Additional 2-ply strips and triple stitching protect the trailing edge from stretching, wear and tear or potential ripping.

Valve Adapter
We know a lot of wing users will already have a stack of pumps at home for either their kites or other inflatable equipment. Selling the pumps separately from the Airwing helps you keep costs down and by including a valve adapter, we make sure your pump works on the NSP Airwing too!

NSP Airwing

Multiple leading-edge handles
Having off-set handles helps in maneuvering and flipping your wing when it’s face-down on the water.

Premium comfortable handles
Comfortable handles on the strut and on the leading edge allow for hours of rider comfort and give the ability to tune the sheeting angle. The center leading edge handle is placed as neutral as possible and allows for complete depowering and control while you focus on carving, downwinding and surfing.

Camber panel
By strategically placing an additional foiled strip of rip-stop material between the strut and the wing canopy, the Airwing boasts a smooth preset profile that powers up early and maintains shape under all circumstances.

TPU reinforcements
Strategically placed TPU strips dramatically increase durability while keeping the wing light.

Twin windows
PVC windows are both safe and sturdy, enabling increased visibility.

Pack your NSP Airwing properly for storage to get the most performance out of your Airwing. Read more here.

Dynamic dihedral
Notice the subtle dihedral design, helping to create a stable wing, even in overpowered conditions.

Airwing Video

Product review

Magazine test by WingSurf (special edition)

translated from French: Easy “one pump” inflation for this NSP with a wide tube connector connected to the central axis but the screw valve system is unique and the nozzle supplied is not really standard with all pumps.

When inflated, there is a relatively thick leading edge and centerline. The general design is similar to the Korvenn: a little slim, moderately hollow but with a more taut blade (canopy?!). The wing also features 3 round handles on the leading edge and 5 aligned on the central flange.

The construction is quite light but the end caps are reinforced with kevlar patches, as are the tips which also incorporate rigid PVC plastic reinforcements on the corners. Two PVC windows are placed on either side of the central axis. No quick deflation valve. The NSP Airwing appears rather well balanced and quite light from the start, with very comfortable handles, well connected and well placed.

At the 4.0 size we found the NSP Airwing  to lack power at the lower end for heavier riders, but light ones should do fine. Its acceleration is not surprising nor twitchy and fun to ride with a healthy overall handling. Handling works in overpowered conditions too. We’re missing a neoprene pad under the central handle of the leading edge, as your knuckles will be in direct contact with the seams in neutral mode.

Click cover for original review

Even if the windows are on the narrow side of things, they can still be useful for beginners. The NSP Airwing offers a good compromise for riders looking for an easy wing to cruise with and to progress on.

Surface: 4.0 m
Official specs / Observed weight: 2.3kg / 2.5kg
Handles: Yes – 5 aligned along the strut + 3 on the leading edge
Wishbone: no
Battens: no
Windows: Yes – on each side of the strut
Leash: Yes – curled with single velcro
Pump: not supplied / adapter included”

Unboxing by Dan Gavere

Additional Info and Replacement Parts


Out of the bag, the Airwing is ready for action. First, secure the supplied leash to the leading edge. Using the low-profile valve, inflate your Airwing to a pressure no higher than 7psi. Find more information on how to set up your Airwing by downloading a short manual here.

By using one-pump technology, leading-edge and center-strut inflate together, forming a strong, flex-resistant frame. The supplied pump adapter will fit common Halkey Roberts pump nozzles, used for high-end inflatable products. *Pump sold separately

Lift off by giving it a few shoulder rotations, some light board pumps, and off you go. Once flying, the Airwing feels fast, balanced and can easily be tuned for power by moving your backhand between the ultra-comfy handles that run the full length of the center-strut. Match the Airwing with an NSP SUP Foil Pro and NSP Airwave and start covering serious distances.

Click to find lots of HOW TO videos and information on getting started.


Designed to maintain its shape in all circumstances, the Airwing is stiff and features a clamped valve making sure you can recover your equipment in case of a leak. If you run into any issues, NSP offers replacement leading edge bladders, strut bladders and air valve adapters here.


Airwing Gallery

You may also like…